Is your double-pane window damaged, cracked, or letting heat and noise in? Let us teach you how to repair a double-pane window in Singapore. By repairing the window, you’ll block the heat, make your home cool, and also stop the noise and moisture coming in from outside.
That will improve the longevity of your windows and will also give you comfort in your room. Let’s learn how to repair a double-pane window without causing any damage. Therefore, LS Window Repair Services Singapore comes forth to explain the complete process of repair of double-pane windows in Singapore. Moreover, their window latch replacement, window repair, and HDB window are the best in Singapore.
How to Repair a Double Pane Window in Singapore?
When double-pane windows are damaged, cracked, or leak, they no longer block heat and moisture and keep your room cool.
Therefore, follow this step-by-step guide to repair a double-pane window in Singapore so you can enjoy the same comfort again.
Step 1: Figure out what’s wrong
You need to know what’s damaged in the double-pane window. Can you see fog between the glass?
Are there any cracks, or is the moisture leaking in? Figure that out first to decide the right way to repair the window.
If you don’t do that, you may take extra steps that will consume your time and may do more harm than good to the window.
Step 2: Take the window out carefully
When you’ve figured out the issue, the next step is to remove the window so you can repair it. Gently remove the sash, which is basically the part of the window that holds the glass. It’s usually screwed up or clipped.
So, you’ll have to unscrew and unclip it to remove it. We recommend you do it as gently and slowly as possible, as one wrong move could cause expensive damage.
When the sash is removed, put it on a flat surface so that it doesn’t shift and get damaged.
Step 3: Remove the old glass unit
The next step is to remove the old glass. Get a utility knife and cut through the sealants holding the glass. If there are clips or rubber, take those off, too. Then, lift out the glass carefully and gently.
If the glass is broken, be extra gentle so you don’t hurt yourself. When the glass unit is removed, clean up any bits and ensure no sharp pieces are lying around.
Step 4: Clean the window frame
Get a scraper now and clean the dust, glue, and any grime sitting inside the frame. You can also use an alcohol rub to remove the frame’s dirt.
This ensures that when you install the glass again, the frame is perfectly clean and set to hold the glass properly.
Step 5: Fit in the new glass
Get the new double-pane glass now and slide it into the same frame gently. Make sure it’s snug and fit but not too tight, as then it could get damaged. When the glass is in place, apply fresh sealant all around the edges of it.
The seals should look even and cover every gap so that no moisture or heat can get in. Before you go ahead with the steps, make sure you let the frame dry.
Step 6: Put the window sash back
Have you put the sealants properly? Get the sash back now and place it back into the frame. Properly line it up just like it was before. Reattach the screws and the clips.
Once that’s done, open and close the window a few times and make sure everything is working fine. If the window sticks or wobbles, check the alignments.
Step 7: Check your work
Now take a final look. Make sure there are no gaps in the seal and the glass looks clear, not foggy. Run your hand around the frame and check for drafts. If you feel air or see anything off, fix it now. Once everything feels right, you’re done. The window should be solid, clean, and working like new again.
Final Words
How to repair a double-pane window in Singapore? That’s easy to do. That’s actually pretty simple once you know what to do. First, figure out what’s wrong with the window by checking for foggy glass, cracks, or air leaks. That tells you exactly what needs fixing.
Then, gently remove the window sash, take out the damaged glass by cutting through the old sealant, and clean the frame properly so it’s smooth and clear of debris. After that, slide the new glass unit into place, seal it evenly with fresh sealant, let it dry fully, and reattach the sash.
When everything is done, test the window by opening and closing it a few times. If it’s wobbling or sticking, you have probably done something wrong with the alignment. Fix the alignment and also ensure that the screws and clips aren’t too tight or too loose.
