Window rivets are way better than any screws or threads for securing window frames and glass. They’re durable, fast to install, and also don’t require threading, which is why they’re used all over Singapore for windows. But how to remove window rivets in Singapore? Read this article to learn how you can remove the rivets without damaging your window.
Therefore, LS Window Repair Services Singapore comes forth to explain the complete process of removing window rivets in Singapore. Moreover, their window seal replacement, window repair, and window installation services are the best in Singapore.
Why Remove the Window Rivets in Singapore?
Removing the window rivets in Singapore can sometimes be necessary. That’s mainly because of these reasons.
- Window Replacement or Repair: Rivets hold the frames and window glass so tightly that it’s hard to disassemble the window frame for better installation. Therefore, you’ll need to remove window rivets.
- Renovation: When you want to upgrade or renovate your windows, then you’d like to remove the old or outdated rivets.
- Maintenance: Just like nails and screws, rivets can also get weaker and rusty if used without maintaining them. So, to maintain them by replacing them with the best ones, you may want to remove them.
- Damage: Rivets will need to be removed first, even when you want to remove any other damaged parts of the window.
Because of these reasons, you may need to remove the window rivets in Singapore. But how to remove the window rivets?
How to Remove the Window Rivets In Singapore? Step-By-Step Guide
As the rivets offer a quiet stronghold, they’re often installed to be permanent. For that reason, you must remove them gently and carefully, as their strong grip can easily damage the window.
Follow every step of this guide carefully without missing any.
1. Prepare Your Workspace
If you have a clean and distraction-free workspace, then you’ll be more focused and productive while doing the work. Hence, prepare the workspace by removing any furniture or sensitive items that are near your windows. You must wear safety gear, gloves, and also gloves so that you’re safe when any accident happens.
2. Identify the Rivet Type
The tools you’ll need for removing the rivets depend on their type. So, first, check what type of rivets your window has. Are they pop rivets or solid rivets? You’re most likely to have pop rivets, as they are the most common in Singapore.
3. Gather Your Tools
Now, it’s time to gather all of the tools that you’ll need to remove the rivets, including:
- A drill (preferably with variable speed)
- Drill bits that match the size of the rivet’s head (usually 3-5mm)
- A rivet removal tool or punch (for stubborn rivets)
- Pliers (for pulling out the rivet shaft)
- Hammer (if needed)
- Safety gear like gloves and goggles
4. Drill Out the Rivet Head
Start drilling carefully now into the center of the rivet’s head to weaken it so that it automatically comes off. Be sure to only drill right into the head of the rivets and not any other parts of the window, as that could easily damage them.
Don’t be in a hurry when you’re drilling so that you may not put too much pressure to damage the surface underneath.
5. Remove the Head
You can now easily remove the head, as the drilling process has weakened it. If it’s a solid rivet, simply tap lightly on its edges, and it will come off. If it’s a pop rivet, the head will detach on its own after drilling.
6. Extract the Rivet Shaft
After removing the head of the rivet, pull out the remaining shaft of it. You can do that using pliers or the rivet extractor tool to easily pull out the shafts. If the shaft is stuck, gently tap on the edges to weaken it. That will make it easier for you to remove.
7. Clean the Area
Once the window rivets are removed, clean the area completely, removing any dust, debris, dirt or leftovers. When the surface is cleaned, you’ll be able to see any damages that need repairing. Also, if you need to install the new rivets, the surface has to be cleaned properly.
That’s how to professionally remove window rivets in Singapore!
Final Words
How to remove the Window Rivets in Singapore? To remove window rivets in Singapore, start by preparing your workspace and wearing safety gear. Then, carefully identify the type of rivet, gather the necessary tools, and drill into the rivet head.
Once the head is removed, use pliers to extract the shaft, clean the area, and inspect for any needed repairs. We recommend you be gentle and slow throughout the process to prevent damaging other parts of your window.
