The window that won’t open can be frustrating, can trap heat, and also become a fire hazard for you. This is why you must learn how to fix a window that won’t open in your home in Singapore.
Because there’s a lot of humidity and heat in the country, which can make you uncomfortable in your room.
Luckily, to fix the stuck window that isn’t opening, you don’t need any professional help. We’ll teach you step by step how you can do it yourself, sitting at home. LS Window Repair Services Singapore expert in window rivet replacement, window repair, and window gasket replacement services in Singapore.
Why Won’t the Window Open – Reasons
If your window isn’t opening, the following could be the reasons:
- The window frame is swollen because of too much moisture in the air.
- Dust, paint, or grime has jammed the window shut over time.
- The hinges or tracks are rusted or worn out.
- The locking mechanism is stuck or broken.
- The window hasn’t been opened in ages and has just got stiff.
- Something outside like a tree branch or screw is blocking it.
- The frame is misaligned after house setting or shifting.
- Someone painted it shut by mistake during a renovation.
How to Fix a Window that Won’t Open in Your Home in Singapore?
Fixing a window that won’t open in your home can be easily fixed. All you have to do is follow all these steps:
Step 1: Check What’s Blocking It
Sometimes, there’s nothing fancy or complicated that needs to be done to unlock the window and open it again. It may just have dirt, grime, or even some dried glue if it hasn’t been opened for ages or you haven’t been maintaining it properly.
So, take a close look at the window and the gaps, and see if there’s any dirt, grime, or something hard stuck in there that’s keeping it from opening.
Step 2: Clean Out the Tracks and Edges
After finding that there’s something blocking the window, remove it all. Get a small brush, a dry cloth, or even an old toothbrush and start cleaning. Sweep out the dust, dead bugs, and other tiny bits that are not letting the window open.
In some cases, there might be sticky gunk. Dampen it a little with a cloth, then carefully remove it. Just be sure not to soak the wooden frame if your window is made of wood.
Step 3: Lubricate the Moving Parts
The moving parts can get grime, dried out, or even have too much dirt that could disrupt their movement.
That could lead to the window that won’t open. You can easily solve this issue by lubricating all the moving parts.
Just get some silicone-based lubrication and then spray it into all the moving parts, including the tracks, hinges, and so on.
Avoid using oil-based lubricants as they could be sticky over time. When you’ve applied the lubricant, now slide the window back and forth slowly.
If it starts moving now and opens up and closes without any issues, congrats, you’ve fixed it. If it doesn’t, then avoid force-opening it as it may damage the window.
Step 4: Feel Around For Swelling
Wood and moisture don’t get along. In humid places, the window frame can swell up. Run your fingers along the edge. If it feels soft or thicker in places, that’s likely the reason. Open another window nearby.
Let some air pass through the room. Doing that will dry things easily. But still, if it’s swollen, then leave it for some time and then try again.
Step 5: Check If The Lock’s In The Way
Sometimes, it’s not the window. It’s the lock. Try turning it a few times. Listen for clicks or any stuck feeling. If it doesn’t turn smoothly, give it a few gentle moves.
Don’t rush. If it still won’t open, the lock could be broken inside. You might need to take it off and look closer. But don’t do that unless you’ve ruled out everything else.
Step 6: Tap Around The Frame From The Outside
This is more about feel than force. Go outside and tap along the edges. Use your hand. You’re not trying to break anything.
Just a soft knock on each side. Sometimes that loosens things inside. Try again from inside after that.
If it still won’t move, stop for now. Don’t keep tapping. You want to help the window, not make it worse.
Step 7: Adjust The Window Frame
If one side is tighter, the frame might be out of shape. You’ll notice it when one edge opens more than the other.
You can fix the issue by simply loosening the screws just a little. Nudge the frame so it sits straight.
Then tighten everything back. Don’t move it too far. Even a small shift can make a big difference. When it feels even, try opening the window again.
Step 8: Take It Out If Nothing Works
This is the last thing you should try. Only if all the other steps fail. Unscrew the stops, one at a time. Lift the window gently. Don’t twist it.
Clean the space it sits in. Check if anything looks damaged. Then put it back the way it was. Do this slowly. You don’t want to drop it. A careful reset can bring it back to life.
Final Words
How to fix a window that won’t open in your home Singapore? First, check if anything is blocking the frame, then clean out the track to remove dirt or dried paint.
After that, spray a little silicone lubricant along the sides, and feel for any swelling in the wood caused by humidity.
If the lock feels stuck, move it gently back and forth, then tap around the outer frame to loosen tight spots. If it’s still not working, adjust the frame slightly or carefully remove and reset the window.
