HDB window installation is never such a daunting and big task, but when you’re installing an HDB(Housing & development board), you need to be very careful. Because HDB’s regulations for installing windows are quite strict, if you don’t follow them, you could be fined or even jailed for up to a year.
So, to keep you safe from all these issues, we’re going to teach you how to install an HDB window for a home in Singapore while aligning with all the laws. Therefore, LS Window Repair Services Singapore comes forth to explain the complete process of installing HDB windows in Singapore. Moreover, their window seal replacement, window repair, and window installation services are the best in Singapore.
Importance of Installing the HDB Windows Correctly:
You must install the HDB windows correctly for the following reasons.
- Avoids Heavy Fines and Jail Time – If you poorly install the window and it falls off, causing any injury, you may get fined up to S$10,000. Plus, you may also get jailed for a year.
- Prevents Dangerous Accidents – if the window isn’t installed properly, it can become loose and fall, which could cause serious injury that could sometimes lead to death. That will again put you under investigation, and you could get punished for it.
- Saves You Money in the Long Run – You may need to fix or replace your HDB windows if they’re not properly installed. That will cost you a lot of money. But doing it right saves you money in the long run.
- Makes Your Home Safe and Comfortable – When you install your windows correctly, they make your home safe and also comfortable. In Singapore, you also stay protected from rain, heat and humidity.
- Increases Your Home’s Value – A well-installed HDB window that follows all the rules increases your home’s value significantly. And doing the opposite can lower the value.
That’s the importance of correctly installing an HDB window for a home in Singapore. How to install HDB windows correctly following all the rules and regulations?
How to install an HDB window for a Home in Singapore?
Follow this professional step-by-step guide to installing HDB windows for a home in Singapore. It’ll also make you follow all the strict guidelines and regulations of HDB.
Step 1: Check HDB Rules and Get Approval
You need to understand and check the rules for installing your HDB windows. You also need to get approval. The HDB only allows some types of windows, such as sliding and casement. You can’t also install them as HDB requires you to get them installed by only the BCA-approved contractors.
If you live in a high-rise building and replace existing windows, you’ll also need a permit. So, head over to the HDB website and read about the rules and the regulations to understand them better. And follow each as you’d never want to give thousands as fine.
Step 2: Hire an HDB-Approved Contractor
The second step is to hire professional building & construction Authority (BCA) approved contractors. They’re well-learned of the rules and regulations of HDB about installing the windows. They offer you quality and professional work while saving you from hefty fines.
When selecting the contractors, please ensure they’re properly licensed, professional, transparent with the pricing, and have previously installed HDB windows.
Step 3: Choose the Right Window Type
As we told you, you can only use sliding or casement windows according to HDB. So, choose either of these depending on which one you like and which suits your home. Usually, the sliding windows look and work well in the bedrooms and the living rooms.
While the casement windows do a good job in the bathrooms and the kitchen. Also, HDB requires you to use stainless steel rivets for casement windows to avoid accidents. Take that into account while choosing the HDB Windows.
Step 4: Take Accurate Measurements
Then, take the precise measurements of the frame to ensure your window fits perfectly. The contractors will adequately measure the existing window frame’s height, width and depth. If you’re also getting your old windows replaced, they’ll check for any damages and repairs. Just ensure you’re with them to make them work properly.
Step 5: Remove the Old Window Safely
You need to remove the old window carefully so you do not damage your window’s frame. The contractors will unscrew the fasteners, remove the glass panels and also take the frame piece out of the window carefully.
When you’re replacing the window in the high-rise units and kitchen, make sure the contractors are wearing safety harnesses, gloves, protective goggles, safety helmets and also non-slip shoes. If there are any leftovers, clean them properly to prepare the right surface for installing the new HDB window.
Step 6: Install the New Window Frame
After that, you, along with the contractors, place the new Window frame into the opening of the existing one by securing it with the screws and the rivets. Take care of the alignment to make the window function properly.
If you’re using the casement windows, then don’t forget to use the stainless steel rivets as they’re recommended by HDB. The HDB contractors will ensure the frame is aligned up and working fine before moving onto the glass panels.
Step 7: Fix the Glass Panels and Secure Everything
After properly installing the frame, carefully install the glass panel. If you have the sliding windows, then place the glass into the tracks, while for the casement windows, attach the hinges securely. Then, add the rubber seals around the edges to avoid any damage and also prevent the water wind from getting through.
Step 8: Test the Window for Smooth Operation
When the HDB window is properly installed, test it by opening and closing it to check that it is working fine. Make sure the window isn’t misaligned or loose. If you find something off with the windows, immediately let the contractors know, and they’ll fix it on time.
Step 9: Apply Finishing Touches and Clean Up
Lastly, apply the sealant around the frame to keep out the water and dust and also make the windows look clean and aesthetic. That’s how to easily install an HDB window for a Home in Singapore.
Final Words:
How to install an HDB Window for a Home in Singapore? Check HDB rules and get approval, hire an HDB-approved contractor, choose the right window type, take accurate measurements, remove the old window safely, install the new window frame, fix the glass panels and secure everything, and test the window for smooth operation.
