Over time, your window handle can get loose and also wear and tear, making it hard to close and open your window. Not only that but not closing the windows properly makes your home an easy target for burglars.
Therefore, read this article to learn how to replace a window handle in Singapore. We’ll teach you step by step how to do that so that you can keep your windows functional and protect yourself, your loved ones, and your valuables.
Why Replace a Window Handle in Singapore?
You may need to replace a window handle in Singapore for the following reasons. Therefore, LS Window Repair Services Singapore comes forth to explain the complete process of replacing window a handle in Singapore. Moreover, their window seal replacement, window repair, and window installation services are the best in Singapore.
- Security Risks
-
- When your window handle is faulty, and the window isn’t closing well, intruders could easily break into your home. They’ll steal your valuables and may also harm you. Even if you live in high-rise buildings, the intruders could reach there too and quickly enter your home if the handle is faulty.
- Safety Concerns
-
- If a fire or poor ventilation occurs, you may need to open the window immediately. However, you won’t be able to do this if the window handles are faulty. You may also damage the window or its glass if you force the handle to work.
- Energy Efficiency
-
- It could increase your energy bills in Singapore as the loose handle won’t let the window close correctly. The cold air of your AC would be wasted a lot, negatively affecting the temperature of your room and also adding up to the cost of the bills. A simple Window Handle Replacement can prevent that situation.
- Smooth Functionality
-
- It’s annoying to struggle with the jammed or loose window handle to open and close the window. It wastes a lot of time and also ruins your mood.
- Preventing Costly Repairs
-
- What’s now a tiny expense could turn into a big one if you ignore it and don’t replace the handle. It could harm other parts of the window as well, especially if you force it to close or open. But you can avoid this expense with a simple window handle replacement in Singapore.
- Rust and Corrosion
- Singapore’s humidity and rainy weather cause metals to rust over time. Not only do they look bad, but they can also weaken and break unexpectedly. So, replacing the window handle keeps your window functional and also looks good.
So now you know why you need to replace a window handle in Singapore. Let’s learn how to replace it professionally.
How to Replace a Window Handle in Singapore?
If you want to replace your window handle in Singapore professionally, this is the guide to follow.
1. Gather the Right Tools and Materials
When you have all the tools gathered around you, you won’t need to run after each one during the process. So, get all the tools ready, such as:
- Screwdriver, which could be Phillips or Flathead depending on the screws.
- New window handle
- Lubricants like WD-40
- Wrench if the handle is attached to the small bolts and the screws.
- A clean cloth to clean the leftovers and the dust.
Did you get all these tools ready to replace the handle? Let’s get to the other steps now.
2. Identify the Type of Window Handle
Window handles come in different types in Singapore. However, people normally use casement, sliding, and awning window handles. Know the handle’s type to decide the best replacement for it.
The easiest way to know the type is to simply make your way to any hardware shop. Show them the picture of the handle, and they’ll let you know the type. You can also get the replacement from the same shop.
3. Remove the Old Window Handle
After getting the replacement, remove the old handle first. Open your window slightly to put some pressure on the handle. Get your screwdrivers to remove all the screws and bolts from the handle. If the window’s handle is too rusty and jammed, then spray some WD-40 on it and let it dry.
Once the screws are removed, pull out the handle gently, and it should come off easily now. If it’s too tight, wiggle it a little to make it loose, but don’t do it roughly, as it could damage other parts of the window.
4. Clean the Area Before Installing the New Handle
Get a clean cloth after removing the old handle to clean off the dirt, leftovers, and the screw marks. You can dampen the clot and then wipe away the dirt with it. This will ensure that the new handle is properly installed. If there are holes or wear and tear, fill them with any wood filler or insert new wall plugs.
5. Install the New Window Handle
Get your new Window handle and then align it in the existing screw holes. Then, hold it firmly there and then put in all the screws and bolts. Just make sure it’s straight and not misaligned while you’re screwing it. Tight it well, but avoid over-tightening as it could damage the window’s frame.
6. Test the Handle to Ensure It Works Properly
After doing it, test out the window and see if the window handle is working fine. If it’s not, make the adjustments to the screws, and it’s alignment. If the window is stiff, you can apply some lubricant to the moving parts. Follow these easy steps for professionally replacing a window handle in Singapore.
Final Words:
How to replace a window handle in Singapore? Gather the right tools and materials, identify the type of window handle, remove the old window handle, clean the area before installing the new handle, install the new window handle, and test the handle to ensure it works properly.
