Cleaning and maintaining your window screens in Singapore is crucial to keep them protected from the humidity, heat, and frequent rains in Singapore. So, how to clean and maintain your window screens in Singapore?
We’ll learn how to do that step by step in this article. Keep reading all the way through to the end. LS Window Repair Services Singapore expert in window rivet replacement, window pane replacement, and window repair services in Singapore.
Benefits of Cleaning and Maintaining Your Window Screens In Singapore
There are many advantages to cleaning and maintaining your window screens in Singapore. It:
- Blocks bugs from coming inside
- Let air flow freely and feel fresh
- Stops mold and mildew buildup
- Lowers allergy triggers at home
- Makes windows easy to open and close
- Keeps the home clean and comfortable
- Keeps dust and dirt from piling up
- Makes windows look neat and cared for
- Lasts longer and stays strong
How to Clean and Maintain Your Window Screens in Singapore?
Cleaning and maintaining your window screens in Singapore is quite easy. All you need to do is follow all these steps.
Carefully Pull Out the Window Screens
First, check how the screen sits in the frame. Grab it gently at the sides and lift slowly. Don’t rush, or the mesh can bend or tear. Once it’s out, lay it flat on a table or the floor.
Before touching anything else, look for weak corners or small holes. If you skip this, washing can make them worse. Sometimes you notice tiny tears only when it’s flat, not in the frame.
Sweep Off the Dust With a Brush
Hold a soft brush and start at the top of the screen. Sweep in one direction and then the other. Pay attention to corners; dust loves to hide there.
Go slowly so dust does not scatter everywhere. Don’t press too hard or the mesh will stretch. You want it mostly dust-free before water touches it. Oddly enough, brushing first is the step that saves the most time later.
Make the Soap Water Ready
Take a bucket and fill it with warm water, just warm, not hot. Add a small squirt of dish soap and stir until it looks cloudy. Avoid strong chemicals; they damage the screen. The goal is to soften dirt, not melt the mesh.
Once it’s ready, you can see how dirt will lift more easily. Some people skip this, but soap water first always makes the rest faster and cleaner.
Clean the Screen With a Sponge
Dip a soft sponge into the bucket and wring it out slightly. Wipe from top to bottom with small, gentle strokes. Concentrate on spots with grime, but don’t push too hard. Rinse the sponge often so you don’t smear dirt around.
Small circles work better than straight lines. Keep going until most dirt is gone. Sometimes you realize a tiny corner needs extra rubbing at the very end.
Rinse Off All the Soap
Grab clean water and pour it evenly over the screen. Make sure all the soap disappears. Soap left on the mesh will trap dust later. Hold the screen carefully so it doesn’t bend. Let water flow slowly; rushing it can make the frame twist. You notice the screen looks almost new once every bubble is gone.
Let the Screen Dry Properly
Shake off as much water as you can. Then place the screen somewhere shady. Sunlight can warp the frame if it sits there too long. Pat the screen lightly with a towel if needed.
Wait until both sides are fully dry. Drying isn’t just about avoiding mold, it also keeps the mesh firm. Sometimes air alone is enough; sometimes the towel makes all the difference.
Check for Holes and Fix Them
Once the screen is dry, look closely at the mesh. Check corners and edges for holes or tears. Small holes can be patched with a kit, and corners pushed back in.
Fixing now stops bugs later. Regular checks prevent bigger repairs down the line. You may think it’s fine at first glance, but small holes always show up when it’s flat.
Put the Screen Back in Place
Lift the dry screen and place it carefully in the window frame. Make sure every edge sits right. Press gently so it stays secure without bending.
Wiggle it lightly to make sure it doesn’t move. A solid fit keeps insects out and keeps the screen in good shape longer. Sometimes it takes a few tries to settle it perfectly.
Final Words
If your window screens get damaged quickly, then you’re not properly cleaning and maintaining them. By maintaining your window screens and cleaning them regularly, you can remove the humidity from them, extend their lifespan, and also keep them looking fresh.
So, how to clean and maintain your window screens in Singapore? These are the steps: Remove the window screens carefully by lifting them slowly from the frame and laying them flat, then dust the screen with a soft brush to get rid of loose dirt and dust in the corners.
Next, prepare a bucket of warm, soapy water to loosen grime and wash the screen gently with a sponge in small strokes, focusing on the dirtiest spots. After that, rinse the screen thoroughly with clean water to remove all soap and let it dry in the shade while patting lightly if needed.
Finally, inspect for holes or tears and repair any small damage before reinstalling the screen securely into the window frame, making sure it fits snugly.
